StarTech.com 4-Port PCI Express USB 3.0 Card
StarTech.com 4-Port PCI Express USB 3.0 Card Product Description
The PEXUSB3S42V 4-Port Dual Bus PCI Express USB 3.0 Card lets you add four dual bus USB 3.0 ports to your PCIe x4-enabled PC. Dual bus architecture improves USB 3.0 performance by transferring data on independent channels to your computer, giving you faster file transfers. When multiple devices are connected, traditional single bus USB 3.0 cards share your maximum bandwidth between all ports. By employing a second host controller chipset, the dual bus transmission channel is shared across two ports rather than four. Allocating up to 5 Gbps for each set of two ports reduces performance bottlenecks, and effectively doubles your total available to bandwidth to 10 Gbps. Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details. For high-power USB devices, this PCIe USB 3.0 card includes an optional SATA or LP4 power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 bus-powered devices (500mA for USB 2.0). The USB 3.0 card also supports USB Battery Charging Specification 1.2 (Apple Mode only), letting you charge compatible Apple devices (iPhones and iPads) faster than a standard USB 3.0 port. The controller card is compliant with USB 3.0 standards while offering backward compatibility with existing USB 2.0 / 1.1 devices. For added versatility, the USB 3.0 PCIe card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers.
- Provides four external, dual bus USB 3.0 Ports
- Supports up to 10 Gbps total transfer bandwidth - Up to 5 Gbps per two ports
- UASP support across all four ports
- PCIe x4 interface compliant with PCI Express 2.0 specifications
- Optional LP4 or SATA power connector provides up to 900mA per USB port
- Supports USB Battery Charging Specification 1.2 (Apple Mode only)
- Fully compliant with USB 3.0 rev 1.0 and Intel xHCI rev 1.0 specifications
- Backward compatible with USB 2.0 and USB 1.0/1.1 devices
- Includes a Low Profile/half-height installation bracket
- Hot-swap feature to connect/disconnect devices without powering down the system
External Connectors 4 x USB 3.0
Internal Connectors 1 - SATA Power (15 pin) Plug • 1 - LP4 (4 pin; Molex Large Drive Power) Female
Connector 1 - PCI Express x4 Male
Environmental Operating Temperature 0 to 50 °C - Humidity 5 to 85 %
Form Factor Interface Card
In The Box 1 - 4 Port PCIe USB Card • 1 - Low Profile Bracket • 1 - Driver CD • 1 - Instruction Manual
Dimensions 1.5 cm (W) x 16.7 cm (D) x 5.5 cm (H) - 0.90 kg
Reviews of StarTech.com 4-Port PCI Express USB 3.0 Card
Unfortunately, We don't currently have any reviews for this product.
Why not be the first to write about StarTech.com 4-Port PCI Express USB 3.0 Card?
Why buy from shop4world.com?
We've been trading online for several years.
All orders are insured and delivered to your address with the best of care.
We're working with the best and most secure payment gateways.
Get rewarded with Player Points! Saving you even more money!